English
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
Polski
عیب‌یابی گرم شدن بیش از حد پمپ هیدرولیک و افت جریان در بیل مکانیکی کوماتسو PC1250
A technical guide on diagnosing low hydraulic pressure, oil overheating, and swashplate response delay in Komatsu PC1250-7 and PC1100-6 main hydraulic pumps.
پمپ هیدرولیک اصلی Komatsu PC1100 و PC1250 (سری 708-2H / 708-2L): انتخاب، مرجع متقابل و تجزیه و تحلیل خرابی
Engineering guide covering application scenarios, part cross-referencing (708-2H-00322, 708-2L-00522), and root-cause failure analysis for Komatsu PC1100-6 and PC1250-7 main hydraulic pumps.
چرا یک پمپ هیدرولیک پس از تعویض به سرعت فرسوده می شود؟
Replacement excavator hydraulic pumps often fail prematurely because contamination, incorrect installation, poor oil/filter condition, system pressure or heat issues, and other hydraulic component problems remain unresolved. Proper cleaning, inspection, installation, and commissioning are essential to prevent repeated pump failures.
پمپ هیدرولیک بیل مکانیکی در مقابل شیر کنترل اصلی: چگونه مشکل واقعی را شناسایی کنیم؟
This blog explains how to distinguish between excavator hydraulic pump and main control valve problems by comparing symptoms, such as whether all functions or only specific circuits are affected. It also outlines a systematic diagnostic procedure involving oil checks, filters, pressure testing, function comparison, and valve inspection.
پمپ های هیدرولیکی سری AP2D برای حفاری
This guide covers the Rexroth (Uchida) AP2D series of tandem variable-displacement hydraulic pumps for 1.2–8 tonne mini and compact excavators, including AP2D12 through AP2D36 models rated at 350 bar and 3500 rpm. It provides OEM application references, cross-reference codes, and buyer guidance for sourcing exact pumps, control variants, and spare parts.
چه چیزی باعث ایجاد صدا در پمپ هیدرولیک بیل مکانیکی می شود؟
This blog explains common causes of noise in an excavator hydraulic pump, including air ingestion, cavitation, low or contaminated oil, worn bearings, blocked filters, and incorrect oil selection. It also outlines symptoms and preventive maintenance steps to reduce downtime and extend pump life.
چگونه روغن هیدرولیک شما به آرامی حفاری شما را می کشد
This blog explains how contaminated, degraded, or water-aerated hydraulic oil from the machine's shared system can silently damage an excavator final drive travel motor through abrasive wear, lubrication loss, and cavitation. It emphasizes cascading failures and recommends filter changes, oil sampling, flushing, and root-cause repair before replacing a final drive.
